Granbury · Weatherford · Stephenville · Glen Rose · Aledo
Garage Floor Coatings in
Granbury & North Texas.
Epoxy-and-polyaspartic flake floors built to take Texas heat without peeling or yellowing. You see the flat price before we knock on your door.
The System
A four-layer system, built to last.
Most “epoxy” floors are one coat of the cheap stuff. We build a real system over two days: a ground and repaired slab, an epoxy base, full color flake, and a UV-stable polyaspartic topcoat that holds up to Texas summers.
- 1
Diamond-Ground Concrete
Day one starts with prep. We diamond-grind the slab to a clean profile and fill the cracks and the expansion joint. Cheap installers skip this step.
- 2
Epoxy Base Coat
We lay a strong epoxy base coat that bonds into the ground slab and holds the flake.
- 3
Full Color-Flake Broadcast
We broadcast Torginol color flake to refusal in the color you pick. You get full coverage and a tough surface with grip.
- 4
UV-Stable Polyaspartic Topcoat
On day two we scrape it back and seal it with a clear polyaspartic topcoat. That topcoat takes the Texas sun without yellowing.
Clear, Honest Pricing
Know your price before we visit.
Our price is on this page. Flat, all-inclusive pricing covers materials, labor, prep, flake, topcoat, and cleanup. You see the number before we visit.
Coating, all-inclusive
$6/sq ft
Prep, grinding, crack repair, base coat, flake, UV topcoat, labor & cleanup.
+ $1/sq ft if you’d like us to move everything out and put it back.
Instant Estimate
This is a ballpark. Your written quote is exact and depends on slab condition and prep.
Lock In This PriceMake It Yours
Pick your flake.
We install real Torginol color flake in dozens of blends, from clean grays to warm Hill Country earth tones. A few favorites are below.
Why It Lasts
Built to hold up.
Prepped the right way
We diamond-grind the slab and fill the cracks and joints. Skip this step and the coating peels within a year or two.
UV-stable topcoat
Our polyaspartic topcoat takes the Texas sun and hot tires without yellowing or lifting.
Full flake, edge to edge
We broadcast color flake to refusal for grip underfoot and a finish that hides wear.
Upfront flat pricing
See your price before we come out. No pressure and no “call for a quote.”
The Real Thing
Bare concrete to showroom floor, in your driveway.
Our own crew handles the work, start to finish. We show up on time, do the prep, and leave your garage cleaner than we found it.
Get My Free Quote
Questions
Straight answers.
How much does a garage floor coating cost in Granbury?
Our coatings start at $6 per square foot. That price covers prep, materials, flake, topcoat, labor, and cleanup. Want us to move everything out and put it back? Add $1 per square foot. A typical 2-car garage runs about $3,000 to $3,600, and you see the price before we visit.
Is this epoxy?
We use an epoxy base coat as the foundation, then go further. We diamond-grind and repair the slab, lay the epoxy base, broadcast color flake edge to edge, and seal it under a UV-stable polyaspartic topcoat. A hardware-store kit skips the prep and the topcoat, so those floors yellow and lift. Ours hold up in the Texas heat.
How long does it take?
Two days. On day one we grind and prep the slab, repair cracks, lay the epoxy base, and broadcast the flake. On day two we come back, scrape it smooth, and seal it with the polyaspartic topcoat. Each stage cures before the next goes down, and that cure time is why the floor lasts.
Do you offer a warranty?
Yes. Every floor comes with our written warranty. We stand behind the prep and the product, and we come back if you hit a problem.
What areas do you serve?
We’re based in Granbury and cover Hood, Parker, and Erath counties. That includes Granbury, Weatherford, Stephenville, Glen Rose, Aledo, and the southwest Fort Worth towns nearby. Call us if you want to check your address.
Free Quote
Let’s talk about your floor.
Tell us about your garage and we’ll send back a firm, no-pressure price. You can also call (817) 904-3634.